Separate names with a comma.
Your Autel AP2500E scan tool is probably better than your friends scan tool for the Prius. The Autel AP2500E is capable of reading the freeze...
Are you sure that the trouble code is P3001, or is the trouble code P0301?
Your Prius does not have an alternator. If the car was in "ready," and the car was running and then turned off after disconnecting the jump...
The Red Triangle (Master Warning Light) usually indicates a problem with the hybrid system. I think the five trouble codes that you listed do not...
If you replace the voltage sensing wire harness with a new one purchase from a dealership and replace the battery ECU with one purchased from...
It appears that English is not your native language. Some of the translations from you native language are not very clear when converted to...
You need to use a scan tool to check for the trouble codes.
I just read on Reddit that his domain was seized about January 17, 2025. It did not say who seized the domain.
Block #1 has a negative voltage because there is corrosion at the orange connector (voltage sensing wire harness) at the HV battery ECU. Look at...
If it was my car, I would not take the chance to rebuild the engine. I would replace it. The cylinder head at cylinder 4 does not look good. I...
Are there any warning lights on the dash? Did you scan for trouble codes? Did you remove the orange safety plug from the hybrid battery when...
You probably have corrosion in the orange connector for the battery ecu. Do a search in this forum for pictures and more information.
The engine overheating could be the engine water pump starting to go bad. Keep a close watch on the engine coolant level. Did the repair shop...
Rather then taking the two Dr Prius screenie that you requested, take a look at the freeze frame data for the P0A80 code. Then you can see all the...
The Dr Prius app is just retrieving some of the parameters that are in the Hybrid Control ECU and the HV battery ECU and presents it in a user...
Your engine water pump can be turning slower than it should be turning, and it will not trigger a P261B code. When the pump is turning slower,...
^+1 You need a better scanner. Read post #1 and then scroll down to post #37 in this thread, https://priuschat.com/index.php?posts/3246758 The...
The OP said in post #18 that he has P0AA6 trouble code. The OP needs to get the sub code for P0AA6 to narrow down where the problem is at.
HV battery temperatures of 97F and 101F are NOT high temperatures. They are normal temperatures.
The Dr Prius screenshot is NOT normal. For a healthy battery pack, the Delta SOC should be 0.0%. Yours is showing a Delta SOC of 42.5%. Delta SOC...
