Separate names with a comma.
Gearing up to do the head gasket on a 2013 Prius Two with 199k miles. EGR cooler and pipe were completely clogged at 150k - worked fine after...
2013 Prius Two, trying to pre-order parts for a head gasket DIY. In the past, when I have done exhaust manifold, I have tended to replace about...
2013 Prius Two has been sitting idle for 2.5 months now due to bad head gasket, so I wanted to make sure the traction battery does not get too...
So confusing, I found 2 (genuine Toyota) Part Numbers for the Head Gasket Set: 04112-37254 and 04111-37316 Which is better for a 2013 Prius Two?...
Anyone have any recommendations on a Prius head gasket replacement repair shop/person in the Twin Cities MN? Also, if you've heard of what the...
2013 Prius Two with 200k, well maintained (all "standard stuff": ATF, coolant, PCV valve, oil, Top Tier Gas, etc) SUDDENLY getting engine knock...
2013 Prius II with 178k miles. Both high beam lights out. Visually both look fine. Swapped in a new driver side one - still not working. Moved...
Could anyone assist with finding the part numbers for: 2013 Prius Two Driver Side Rear Brake Caliper To Flexible Brake Hose: Banjo Bolt And Crush...
I saw that there was a monthly meeting of Twin Cities MN Prius Enthusiasts each month (in 2016/2017 anyways). Minneapolis Prius & Car Club (MPC)...
Swapping out the summer tires for the winter set on separate rims. One rear left lug nut won't come off with a cordless impact wrench or breaker...
2013 Prius Two with 153k miles, ATF drain and fill for the 1st time using Genuine Toyota WS using the NutzAboutBolts tutorial (not the original...
2013 Prius Two with 153k miles. Completed the list of maintenance below. Are there any precautions I should take for the 1st startup? (already...
Got them out easily with @NutzAboutBolt tip of using a long handled pry bar. Anybody know any tricks about putting the new spark plug tube seals...
I saw a youtube video where a rubber mallet and screwdriver were used to basically punch the seal out in one piece. No such luck for me, but maybe...
Using the outstanding and unparalleled NAB youtube video "2010-2015 Toyota Prius EGR and EGR Cooler Cleanings for P0401 Code" as the reference....
Looking at the weeping oil spread pattern on the rear & passenger side of the engine, I'd guess that at least the oil pressure sender is weeping...
Having a devil of a time breaking the bottom EGR cooler nut (i.e. bottom of the pair of bolts that connect the EGR cooler to the exhaust...
Wonder if anyone is aware of a good, hopefully step-by-step guide on how to replace the valve cover gasket? I poked around here and on youtube...
153k miles and doing the whole EGR circuit cleaning. (languishing at EGR cooler removal ... uggghhhh) I have the intake manifold (IM) completely...
So I removed my MAP (Manifold Absolute Pressure) sensor from the throttle body and shot it with brake clean and used a Q-tip to clean it (kind of...
