Separate names with a comma.
We are on a road trip. Mostly interstates, some dirt roads, one kinda muddy road about 500 miles ago. Before the trip, I replaced the lower front...
My 2011 has "bisque" interior. I've found hints of OEM fabric sources, but nothing solid. If anyone has actually tracked down fabric that is...
Having just replaced several parts, I thought these lists might save others some hassle... Front wheel 21mm, 76 ft-lb (loosen before lift) Axle...
I just realized, my How To is in the Prius V thread, not here :( New Adventure: Replacing the Rear Axle Beam | PriusChat Here's the Table of...
Now that my rear axle has been replaced, and I wore out two tires 100% due to the bad rear alignment... ...I am now seriously curious about the...
Sigh. A friend helped me install new rear axle bushings. Unfortunately, I goofed, aiming the marker at the wrong weld. The spec says the marker...
Ugg... Got 2011 reassembled. I can NOT get these codes to clear. Using Techstream. Anomaly I see is that the dash LED's don't blink at all...
Thus begins the next phase of getting our 2011 Gen 3 into significantly better shape.*** I've made good progress and will write about that in a...
The OEM part for the Gen3 Prius rear axle support bushing is 48725-47030 I find no alternative for that named part... but quite a few for that...
This is my adventure in DIY rear shims for my Gen 3 Prius. First time I've gone in deeper than wheels on the rear end. I'll fill in blanks later....
In another thread, @The Critic used NAPA-numbered versions of (Spicer? NO -- MOOG!) alignment shims, heavier duty than the typical SPC shims for...
UPDATE: These are by MOOG not Spicer!] In another thread, @The Critic used NAPA-numbered versions of SpicerParts alignment shims, heavier duty...
After 13 years on the road, no surprise: my 2011 Gen 3 TPMS sensors have been going out. Here are lessons I've learned: Sensor Sourcing * YES,...
Whew. At long last I believe I've found a way to measure Prius HV battery module DC Internal Resistance that gets results similar to what we see...
I hadn't noticed this documented, so here are the details for replacement bolts and nuts on battery modules. 1) All threads are M5 x 0.8 2) For...
I've been working on my 2011 Prius, that has a new 2015 engine. Was doing body work etc... in retrospect I'm not too surprised the 12v battery...
I have an almost-new front apron (front most black plastic underneath.) Already, it is showing signs of stress and wear. The plastic corners...
I just discovered I have an issue with some missing bits at the rear end of my 2011 Gen 3 passenger body side moulding. I'm sure I can repair the...
Gen 3 Prius, across the top of the front bumper cover where the hood drops down... there's a long cushioning strip. In replacing my bumper cover,...
Auugh. I have the "PriusChat" Euromud guards on my 2011. Except, the right-rear mud guard fell off sometime during a recent trip Does anyone...
