Separate names with a comma.
Sorry. I searched inside Priuschat and found nothing, but google showed me the proper search terms. I assume by the time I finish reading the...
Anyone ever tried adding a electrified passenger side door pull to a base model? I'd bet the harness is there. Maybe your can enable it the OBD...
Although it was a little effort to replace the A/F Sensor, this was apparently the problem. Even after removing the inverter, the access is still...
Wish it hadn't shrunk so much...otherwise, I love it.
Sorry, I changed my sig when I bought the new Prius. I'm trying to sell my 2005 Prius (with 215K miles), and a check engine light is a severe...
I verified the O2 Heater is drawing current (about .76a), so that doesn't explain anything. All my "monitor tests" have passed, although i'm...
I'm going to run the "status monitor tests, but I'm confused about two things: 1) The CAT test says to go into Inspection Mode (IM) and drive for...
As an example or as a suggestion as to where I look for my problem?
My O2 sensor voltage is not getting lost, at least not between the connector and the ECU. Measuring the A/F is problematic, since I don't think...
So oil burning couldn't damage the CAT to create the symptom? I'm skeptical about the A/F Sensor being bad just because it responds as expected...
I have to make double sure that the O2 heater is working, then it's either sell the car as-is or dig into it first. Techstream doesn't offer...
The "parts locator" in the manuals are very frustrating to find actual parts. I think it's on the manifold, since you can replace the whole...
My third O2 (Toyota branded) sensor works exactly like the original and the non-Toyota replacement. Sits at about 0.8v unless I modify the...
The multimeter test shows the reading is accurate. Does this theory make sense? : The A/F sensor would adjust for oil burning, but the burned oil...
Is replacing the A/F sensor as big a pain as the manual indicates? Although I'll do the multimeter test today, and wait for my new O2 sensor...
Checked the connector and ground connections, and all are per the manual. OK, here's the latest data. Engine was warmed up and in "inspection...
The original post has the A/F voltage - looks right to me. Haven't gotten any codes besides P0138.
It was a plug compatible sensor. Supposedly a Denso, but I think it was marked otherwise. I'll check the connector, but I checked it when I...
Here's a couple of more data points: 1) The DTC freeze data showed an O2 sensor of .78v I put the thing into Inspection Mode, warmed up, and found...
I replaced the PCV valve a few weeks ago, and the old one seemed functional. I didn't check the downstream sensor except under the A/F Control...
