Separate names with a comma.
Right now it is exactly at 2/3 mark on the oil stick. Not losing oil, but in the last months only my wife drove the car and didn't check it. I...
I was just guessing, but the problem is still there. Outside temperature increased also so the problem is not that bad anymore. I will try to do...
I guess I found the problem, but I need to monitor during the next days. Yesterday I was tightening as much as I could the clamp between the...
No, it is fixed very well.
I did the throttle body cleaning with the car stopped, means I can remove this one from the list. My guess it is also that the box it can be the...
On the next long run, on highway, I will go only on gasoline to see if the error will pop-up. I will try to monitor the fuel trim on LPG also....
Yes, P0171 was the only error I got 2 or 3 times during the last 8-9 months, when I was on highway after 30-40 min all the time. I checked HV...
Yes, I did the reset. Unplugged the 12V battery for 10 min. The problem was still there. I just re-tightened a little-bit the bolts (I am afraid...
Thank you for the replies. 125k miles right now. I did clean the corrosion between throttle body and intake manifold, I guess it is airtight...
In the last week I was running a full tank of high octane gasoline + aditive for injectors. I didn't run on LPG during the last days. Anyway the...
Replaced today the MAF sensor and it looks like this was not the cause. The problem is still there. Waiting for more suggestions. :/
Can you please tell me more exactly which valves I need to check? The compression I don't have the proper tools to check them. Maybe I will go to...
I forgot to mention that the car is converted to LPG, but even if I shut off the LPG system completely, symptoms are the same. And also on the...
Good day! I have a problem with my '06. Until the ICE engine gets warm (5-10 min) the car is shaking very bad when the engine stops or starts. I...
Indeed, NRES is not responding. NRES - Device responds in diagnostic mode, but gives no DTC information.
Good day, I got an error on the MDF when I try to start the navigation. "A program cannot be read. Please contact the dealer." I went to the...
I forgot to check the 12v battey health, but I remember that in ready mode, with the lights off, it was 13,8V. I did wait 10 minutes before I...
Fist of all thank you everybody for your time and suggestions. Today somebody commanded to take out all the connectors and clean them with a...
Thank you for the suggestion about the clock spring. Indeed, I made the connection with the foam, because it was the last thing I've done, but can...
I had the ac running all day after a long drive without any result. The thing is that when the horn fuse is on and I am starting the AC, it honks...
