Separate names with a comma.
Sorry it's a 2004
Maybe I'm hijacking a thread I'm trying to turn off all 3 brake lights,,getting codes c1345 and 1368 I bled the brakes
It's a ultra, I try to relearn and I get code 1368 linear valve offset fault,,, is this a bad actuator? Edit: Yes ultra still get c1345 and c...
My snap on scanner won't do it unless park brake is set ?.?.?
Can u use a snap on ultra scanner to relearn linear valve?
For gen 2 but did give me a few leads thanks .
What will run this ? it says no app found to run it .
Getting code p0a94 getting power to the two outside contacts on the pump on the car,, it runs on the ground with power to the outside contacts...
Just had that problem ground wire broke coming out of the little box , i put a new wire on it , still having a plock issue snd car wont run...
Have noticed the parking brake light stays on, checked and it's hitting the switch ok , maybe a bad parking brake switch Posted via the PriusChat...
Not showing interlock code after fixing some weak ground wires .
Getting circulation in tank now after fixing some weak ground wires .
I found six ground wires on driver's side front wheel well all with corroded ends ,one ground wire in the same area to the wheel well from top of...
My pump is running , probably not moving that much .
Pulled a lot of plastic looking for problems, wireing etc, not able to clear any of the many codes ,with scanner or any methods found on line, a...
I thought you should see movement in the resivoir tank with the pump running .
Also will take other side apart check connection s and clean fan .
Yes did all three, and then took small white connector apart and checked for continuity from Safety switch it checked good so trouble may be...
Looks to be under the plastic inside .
Probably going to take apart interior and look for rodent damage , Toyota shop said they found rodent droppings .
