Separate names with a comma.
Oh, I misunderstood your question, but I'll leave my above reply for the sake of reference. It comes with banana to XT60 leads, and I'd already...
XT60 is weird. I actually got cables with the wrong gender the first time. Check out this diagram:...
Hey guys, I recently swapped in a "low-mileage JDM" motor and reconditioned the hybrid battery in my 2013 Prius, and I thought I'd share a few...
Because the studs are nickel-plated steel, you want to use nickel-plated steel bolts, which you can verify by seeing whether they stick to a magnet.
The studs on the Panasonic NiMH modules are nickel-plated steel, so they will attract a magnet.
I ran my fuel pump with a bench power supply, with the fuel line disconnected from the engine and a hose connected to it running to a gas jug, to...
Guide pins are supposed to be in the motor. If one sticks in the transmission when you pull an old motor out, you should yank it out before you...
Sure, I'll post them up this weekend. There's not a lot of detail there though, I was in a hurry. I'm not sure offhand what that could be on your...
That's fair. The beeping stopped when I cleared the DTCs after replacing the accumulator, and it came back with fewer DTCs, so the accumulator was...
Also, in retrospect, my accumulator was definitely bad. I never did a zero down before replacing the actuator, and I never got any squirting brake...
Also I had the car on jack stands while I was doing all this, with the front about 4 inches higher than the back because I wanted clearance to use...
Replaced the accumulator this weekend. I was able to do it without removing the crossmember or any special tools, but I am no kind of poster child...
Replaced the actuator over the weekend. Still having problems. After I cleared the DTCs the beeping stopped for a minute, then came back. Even...
Thanks! I didn't know the wheel size was the difference between those two part numbers, I might have ordered the wrong one. I did take it to the...
I heard back from the techinfo support people today. They didn't give me a refund, but they did give me a credit that I can redeem to get 2 days...
Thanks. The second account I created went through with no issues, I just hope they give me a refund for the first. I stepped through the...
I did, still no confirmation email, still the same error when I try to log in: "There was an error in the page you requested. "Please contact an...
Still working on it. Tonight is the first chance I've had to attack the problem. Just tried to get a two day subscription to techinfo, they...
Mods, you don't have to approve this thread. It's way too long, I was still on the adrenaline rush from the experience when I wrote it.
Hi folks, just thought I'd share my experience here for the reference of others. I'd searched for something like this a while back, but didn't...
