Separate names with a comma.
Look at Chevy volts easily had for like 5K I've got two and 4 Prius. The Chevies are out pacing the Prius currently both bolts easily had under...
If DC to DC is fubar 12 v won't charge . So at ready you'd see like way less that 13 v etc the 12v going down . As it not charging . DC to DC is...
You had a used actuator install and you can't learn the linear valve offset very common you need another used actuator or a 1400 or so new one...
When you put the bolts back into the strut all you got a do is push in on assy. Tighten . Slop always gets pushed in . The ball joint is undone at...
Do first diagram shown cambers off on left front it looks like usually arrow is front of car.
But your alignment is completely in the green?. So does car track true not braking of course? If so then I'd say what ever is clunking in back ....
Do if 11.5 just sitting what happens under load . That's parking lot test at Menards.
It just needs a fuel pump then there's nothing wrong with the car but if you're not going to do anything with the car and it's just going to sit...
You need to look at where everything mounts in the back and take a pry bar and see if you can pry anything down that looks bolted up a lot of...
Yes of crash bolts are installed and obviously all bets are off because you're undoing the crash bolts to remove the knuckle assembly most of mine...
That 11.4 volts is very problematic that needs to be 12.3 to 12.7 to keep up the electrical system in the car and all the computers communicating...
ABsolutley not . You're tie rod ends pops out no loosening the adjustment. The two bolts hold strut to hub that assy get pushed in then tighten ....
As above and I'm guessing the lil car is green in MFD ? You need capable scanner
I just find it seriously quicker to have the hub the big aluminum hub thing off the car it's just to quick and then you got all the room I world...
Hell our 2010 went $396,000 with nothing do e to it . No EGR cleaning etc . Hybrid battery at 200K used. Brakes . Other than that nothing but the...
Yes that's why I'm taking the whole aluminum knuckle off the strut and the three fast ers on the lower joint to arm . Bring whole thing to two 4x4...
It was my brother's car it was the car that Obama stood next to in front of the White House talking about I like these plug-in hybrids my brother...
I've even using the blue PT gaskets since like 77 lor so . Never ever had an issue W PT. Kerosene yo clean all my life . Berrynans is top notch...
I don't know should you? I'd be looking to give you $2,500 or less for the vehicle I mean I wouldn't want it personally I don't think CarMax...
Never heard of hub buster just take the the 3 fasteners loose on ball joint undo the rod end and two strut bolts and CV nut . And hub falls on foot.
