Separate names with a comma.
Thank you, I will look into that…does anyone know of a place to get rebuilt engines with upgraded piston rings so the oil consumption isn’t an issue?
Thank you…does anyone know if it’s possible to buy a refurbished engine with the better piston rings that don’t leak oil? I’m wondering if it may...
Hi all, I have a 2010 Prius with 200k+ miles on it. About a year ago I got the P0301, cylinder 1 misfire. The Spark plug was fouled, so I...
In my case it turned out to be an internal leak in the ABS assembly, probably due to the fact that I didn’t open the bleeder valves on the...
Thank you for all your help along the way, I got the new unit installed & all is well, thanks to your help & the priuschat community, thanks sgain!
yes that was the issue, thank you!
Thank you ChapmanF for your help along the way as well!
THAT WAS IT!!!!! After two days of work, that was the problem…thank you so much, you saved me hours or days of stress & frustration…THANK YOU MR...
When I attempt to do alinear valve offset, the abs/vsc lights do not blink, per techstream they should be, either techstream is not properly...
Now Im Getting code 1203 & 1345….i did the linear offset with techstream but heard nothing from the valves in the master cylinder/pump...
It was an issue woth the brake pedal sensor…fixed…now back to trying to bleed the brakes with techstream…
Since my brakes lights are on, i cant start the car with ignition on but engine not starting…normally when you press the power button without...
I’ve changed the brake booster assembly, my brake lights are stuck on & can’t put it in “ready off” mode
My understanding is that its not too difficult to swap them out if you have basic skills, there are youtube vids on this…the more involved part...
Ive been dealing with the same codes & symptoms, if you find that it is a sensor or something please share. I’m planning on swapping out both...
Thank you for your clarification & all of your help throughout! Would you say it’s a safe bet that swapping out both is the way to go here?
In my case I’ve determined that the accumulator pump keeps kicking on because there is a leak in the master cylinder pump assembly …I can hear a...
Yes you’re correct, 45. Apparently once they are installed we have to do a brake fluid bleed & also a master cylinder calibration, which requires...
All of these are correct, the VSC (on left) is flashing 54. I’ve ordered a used master/pump and accumulator, hoping a swap will work.
