Separate names with a comma.
Upon further search I found there are two apparently compatible shims: MEVOTECH MS86016 DORMAN 546030 I can find a few sellers of the MEVOTECH...
Years later... I forgot about my thread. But I finally got my struts, shocks, and control arms replaced. They used KYB assemblies with new...
Hello, My 2012 Prius C has a rear wheel that is just under a degree off from straight. The shop that did my alignment claims there are no shims in...
Forgive me I have limited understanding of shocks and struts. I'm expecting to have a mechanic do this, so I assume pre-assembled or not doesn't...
Hello, I'm about to hit 100k miles, and my original shocks on my 2012 prius C are very noisy and bumpy. I'm trying to figure out a suitable...
... I poked around, and could not find a wire. Masterloc, what color is this "BE" wire and how far back to the dash do you need to get to find...
So the wire for pin 23 on 3B (color BE?) exists, and pin 12 in G3(B) "combination meter assembly" is populated?...
Hey there. At least with 2012, 2013 models the wiring was there. I assume it is all the same today, but it should be verified. If you have the...
Armorall? Interesting, I was thinking I might try Vaseline or some other oil. Do you think a dealership would just do the same? I might be able to...
Hello, I've seen a thread about this in prius II and prius III forums, but no mention with the prius C. I've been recently very annoyed by a sound...
Unfortunately these pins are only located on the connector between the main body ECU and the relay/fuse box. Normally in the upper trime levels...
I hope you can figure out something conclusive. Now that you mention it, the time I saw the light come on- it went away after filling up gas and...
Interesting about the two blue wires on that hard to reach plug, which one goes to both fogs (outside or center blue wire)? I should correct my...
tahoeRon, I believe we were discussing the wiring in the big thread a while back. How exactly did you end up doing the wiring? Did you connect the...
It's those $30 Xentecs your using. They are really terrible ballasts and bulbs. I noticed these bulbs burning/blistering the plastic on a Lexus...
I created a thread on my whole project: Custom LED foglights for my prius C trim 2. | PriusChat For the wiring how-to hopefully this is useful...
I decided to create LED foglights for my prius C trim level 2 using the preexisting foglight covers. I used high brightness (130 lumen * 6) amber...
Yes I did test with the lights on, it seems Toyota intentionally programmed the controller to ignore the fog light signal on C2. It's not a big...
Actually the pin 7 you mention is a blue wire on the front gray connector, however it doesn't go anywhere- hence why I tapped it to the foglight...
So the stock has 4 positions: off, DRL, "parking lights + drl(when car is on)"?, on My fog lights turn on when you get to the 3rd position when...
