Installation instructions and pictures on how to install the Stripe Tape Kit available from Sigma Automotive and Japanparts.com web sites. ------- Notes: (1) The instructions are translated from the original Japanese language instruction set included with the kit. (2) In the Instruction Manual Advice Text listed on page 2, it mentions using white gasoline to prep clean the area of application beforehand. I did not have that product on hand and used soap and water to clean the surface with very acceptable results. (3) Total Kit Installation Time = 30 Minutes (4) Stripe Tape Kit was installed 35mm from the rear door edge instead of 62mm as recommended in the instructions because of personal preference. (5) 11/29/2005 - Updated instruction manual to V1.01 (23 downloads of V1.00)
