Both Brake and reverse lights not working

Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by PaulBedi, Jun 10, 2015.

  1. PaulBedi

    PaulBedi New Member

    Joined:
    Jun 10, 2015
    2
    0
    0
    Location:
    Sacramento
    Vehicle:
    2004 Prius
    Model:
    N/A
    I have a 2004 Prius, with both the brake and reverse lights not working (right & left). Already replaced all bulbs and checked fuse...No luck. Any other suggestions?

    Thanks
     
    #1 PaulBedi, Jun 10, 2015
  2. xliderider

    xliderider Senior Member

    Joined:
    Apr 19, 2012
    8,041
    3,214
    0
    Location:
    Honolulu, HI
    Vehicle:
    2011 Prius
    Model:
    Three
    How did you "check" the fuses? Visually, or with a meter for continuity?
     
    #2 xliderider, Jun 10, 2015
  3. Patrick Wong

    Patrick Wong DIY Enthusiast

    Joined:
    Mar 8, 2008
    18,200
    6,492
    0
    Location:
    Green Valley, AZ
    Vehicle:
    2015 Prius
    Model:
    Two
    1. The brake light, which is at the top of the tail light assembly, is composed of multiple LEDs that cannot be separately removed unless you know how to get to them, unsolder, and replace with new LEDs.
    2. If you replaced the reverse light bulbs and they still don't work, check the ground connection. Find the wiring harness between the two light assemblies and look for the wires bolted to the body. Inspect that connection, clean and tighten as needed.
    3. What about the other lights such as turn signals and running lights? Do they work?
     
    #3 Patrick Wong, Jun 10, 2015
    valde3 likes this.
  4. PaulBedi

    PaulBedi New Member

    Joined:
    Jun 10, 2015
    2
    0
    0
    Location:
    Sacramento
    Vehicle:
    2004 Prius
    Model:
    N/A
    I checked them visually.
     
    #4 PaulBedi, Jun 10, 2015
(You must log in or sign up to post here.)