The "prius-touring-club" had a meeting June 28-29 at Chambord. We had participants from France , Belgium and Switzerland. Alltogether around 40 hybrids near a small Drive-In . Please enjoy the pictures here and the splendid album there.
nice i see a picture or 2 about a asus eepc installed underneed the MFD. any pictures about that? and what is this used for?
Re: Hybrids in France eeePC This is for fun : Compte tour "deluxe" sur PRIUS or here : Mesures : Mini-Scanner, CAN view, Scangauge, ... - Page 15 - Forum Prius Touring Club In fact, we made a lot of adaptations to PriusCanMonitor . this is a pgm written in VB6 by a Japanese guy (sorry noname) for the canusb interface , it was adapted by timster for the ELM327. we made lots of changes : the pc is linked to the diag plug of the prius via a canusb interface OR an elm327 interface (the program can manage the diffs). In both cases , we run the comport at full 500kbps , so we do not need masks or filters , we receive around 1660 frames from the CAN by sec , and we filter what we need in the program. we get a very accurate calculation of fuel used (thanks to ken1784 whose supermid allowed the comparison between PID520 & the injector timing)... and of course the graphs are a bit different... there are 6 or 7 running this program in france. I will be very busy in the future because gen3 uses the same protocol , but everything seems different (but the speed !!!) , so it will be necessary to do the same kind of exploration as attila in 2004....
