just fitted some mudflaps kindly sent by a member here front ones fine 2 screws into clips - one plastic clip thing into drilled 6mm hole rear ones fine 2 screws into clips drilled 6mm hole 3rd screw drilled 6mm hole -argh theres no clip should be 2.5mm It seems to be in wrong place anyway drilled new 3mm hole 45mm (1.75") from inner edge beautiful B) photo to follow
Just fitted some mudflaps kindly sent by a member here The front mudflaps fit with three screws The top 2 are fine - remove some plastic screws add a couple of C clips and insert 2 new screws supplied The third screw is really a plastic press fit studa nd requires a 6mm hole to be drilled into the plastic bodywork The rear mudflaps also fit with 3 screws All 3 need new holes to be drilled into plastic bodywork The top 2 are fine - drill 6mm holes, fit C clips, add screws The 3rd screw has no C clip and so only requires a 2.5mm hole - watch out! However it appears to be in the wrong place and doesnt hold the inner end of the mudflap Instead drill a (3mm) hole 45mm (1.75") from the mudflap inner edge beautiful B) See lower left below
