Separate names with a comma.
Good day Cexo, going through some of your postings for Prius gen 4 engine swap, you used CH-R engine and you experienced some misfires. I used the...
Writing from the UK. In the UK we have RHD cars so the actuator is located at the right hand, since it is connected to the brake pedal and the...
if they are the same part number, I do not see any reason why it won't work. Confirm the part number before doing anything
This is another update to the most recent mod I've just added to my 4th gen engine, in my gen 3 Prius; the air filter housing bracket. As you...
Hey @greasecake how is the swap going? Have you finished? Were you able to find solutions to your queries?
Although I used the non-selective valve or the water outlet, I still retained the Y pipe that connects the bypass hose that ran through the back...
Unfortunately I have installed it, however I went outside and had a feel. There is nothing there and it's not open because it's sealed but I think...
I solved this overheating issue by changing the selective valve for a non- selective one. I also changed the gen 3 coolant for a gen 4. [ATTACH]
I have just finished mine, however, I cannot advise you as I used my gen 3 EGR.
This is first 200 miles update after upgrading my engine. I am glad to say that the judder that I experienced on the initial days of fitting the...
If it were the flywheel, the judder would be continuous and could be worse while driving. This is just the first 20 to 30 seconds on first start up
I did my second run yesterday, the Easter and it ran so smooth. One major point before I start, I did not do the Fix that Prius T coolant route....
No I didn't order the gasket. Didn't think it would need a different gasket. If it definitely needs a different gasket, I'm gonna stick with the...
I've just ordered the USDM coolant outlet from the UK. I didn't know i could get one since the part was majorly used in the US models but I called...
@zoeboi954, I am from the UK and the engine I bought to upgrade my gen 3 is exactly like this one. Did you complete the project and how did you go...
