Separate names with a comma.
These are the only pictures I took when the Jumper Block was out. You can buy these entire things on ebay for $30. It's tempting to just start...
Still can't find the PWR Relay
I'm still not sure where the PWR relay is. I took the drivers side j/b completely out and re-checked every fuse and relay visible on a work bench....
Note on taking the car to the Toyota dealership. I know that everyone who has followed this post is probably saying to themselves, just take the...
Sorry, when I referred to "they", I meant whoever wrote the toyota electrical schematics. On the schematic that I have, which is for 2006 prius,...
I have located most everything in Patrick's post. Will check when the weather gets better. I am having trouble finding the relays PWR and IG2....
Thanks for the replys. It's raining today and I have a tarp over the car. Cause the windows won't roll up. I'm indoors studying the electrical...
Both key fobs worked before this happened. I'm pretty sure I tried both of them. When I insert the key in the slot the security light stops...
I purchased the car with one key fob. I bought another one from Toyota and they programmed it. So I had two working fobs when the 12v battery went...
When I purchased the car, it ran but the multi-display did not work. I replaced the multi-display with an eBay one and this fixed the issues with...
My latest attempts and results. With the 12v battery disconnected the new battery measured 12.8 volts. After I connected it it measured 12.75...
I have been testing relays. I tested the two under the dash on the drivers side near the power source control. I tested two on the inside fuse...
I am reading the codes with an old win xp laptop running techstream 10? with a generic mini vci cable. The only system that responds is the power...
Do you these might be the symptoms of a bad relay? Perhaps IG1 or IG2
Still doesn't work. I installed a replacement eBay Power Source Control Module (89618-47011 the correct part this time). Nothing changed. The MFD...
