Separate names with a comma.
What baffles me is that the green light is saying that there's something wrong, but the rest of the system is saying that everything's fine. It...
Check out the attached page. It talks about TWO different flashing patterns. One is okay, the other is bad. Actually, if you don't have a hard...
The manual says: "■If the charging indicator flashes after connecting the charging cable The charge schedule (P. 157) is registered and charging...
Can you still charge the traction battery by putting the car into 'charge' mode by holding the HV/EV switch until the 'CHG MODE' indicator appears...
It's posted on the internet by the people who wrote the program, not some random page. That's why I posted my results from the same test. They...
Dr. Prius states that it supports "1. 2020+ Prius all lineup except 4WD version" and "4. 2016-2019 Prius Gen4 One, Two, Two Eco, Three(Lithium)...
Alfonso, since you're 'going long', I recommend that you buy a good quality bluetooth OBD2 dongle like the OBDLink MX or LX. Don't buy a cheap...
I thought this info might be of interest to the crowd. 2020 Prius Prime 20K Km. - I don't drive much Displayed SOC: --% (i.e. zero remaining...
Guilty as charged. But I get suspicous when a supposedly official document has obvious errors. It makes me wonder if there are other errors that...
I've owned my 2020 Prime since it was new. I have never seen the SOC rise unless the car is plugged in or I manually select Charge mode. For...
You're correct if you're just recharging the 12V battery. But the document is poorly worded and throws in the idea of recharging the HV battery...
One thing I noticed in the TSB referenced earlier is that the quoted timeframes of 60 / 30 days between 12V recharges is based on a...
Now that you know the short cable is easily replaceable, you might be able to buy a dead or broken charging cable for a reasonable price and just...
I opened my brick up once, just for curiosity. The entire assembly on the power side of the brick just clicks into place. You need to open the...
