Separate names with a comma.
I have a 2001 Prius and I replaced the modules with Gen II. It ran fine for awhile then the red triangle came back and the ICE would have a high...
This evening the red triangle disappeared without a reset. I'm thinking the car was not driven for awhile while I fixed the broken sensor wire...
Thanks John for your quick replies. Yes I did replace block 5 already, but that is the only thing I did besides clean the contacts and fix the...
Here is a link to the 4 page diagnostic report of the car I pulled the HV battery from: http://www.wetfeethawaii.com/toyota-diagnostic.pdf I did...
An update. I fixed the broken sensor wire so no more P3030 code and also changed the AC clutch. Car runs great but still geting the warning...
I got one of them running by replacing 2 bad modules. I am getting a P3030 code. I think I might have damaged one of the sensors when I took...
Thank for taking the time to explain this John. I will continue to try to find good modules and in the meantime I have ordered a couple in case I...
So I am looking for modules that will charge to over 7.2V with how much time charging? And then within a day discharge to what level? Thanks.
This time I charged it for and hour and 15 minutes and got 2 modules up to 6.9 and 7.0. The voltage while charging was about 14.5 and I measured...
It was 6.5 for each of the 2 modules. I will try another pair and monitor.
On one 40 min charge I was able to get 2 modules in series up to 6.5V.
Thanks for the quick reply John. While I wait for my charger to arrive I have a regular car battery charger. The options are 6V/10amps,...
Offline and JeffD, thank you for all your very informative posts. I bought a 2003 Gen 1 with 2 bad modules diagnosed by Toyota and I have the...
