Separate names with a comma.
Any trick to opening the 3way valve? I'm stumped why is there insufficient temperature? After the drive, coolant in the top hose and radiator...
Obd is still saying"insufficient temperature". Running in open loop. .
Just fluid came out of the bleed valve. Took it for a spin to check temps. Got up to 195° under load down to 180° cruising. Going to see if more...
Thanks
I don't know if the 3way valve is opening. Ran the car with heat on, burping the hoses and cycling the storage pump. There is still air in the...
Good to know I will bleed the system
I have no techstream data. So I reset the p2601 code after changing the pump Friday. The system is not ready yet, "insufficient temperature"....
What now? Do I test the circuit from ecu to relay?
So the pump runs when I jump the relay. But the pump doesn't operate during normal circumstances. I swapped the coolant pump relay with the heater...
Thank you.
Does anyone know which pins to jump to make the coolant storage pump run on my 2005 Prius? 1,2,3 or 5?
Anyone know what connections to jump to run the coolant storage tank pump?
I found different pictures online and a video but had a hard time seeing the pins being connected.
Swapped the fuse with highbeam fuse. I think pump is running. I would like to bleed the system since I had a leak. Which pins do I jump to run the...
