Separate names with a comma.
Does anyone know any Southern California mechanics and what the cost might be if I were to have someone install a used motor? Not sure if I feel...
So a new coolant pump was put in, the head was sent out to the machine shop, checked for levelness, valves were replaced, all new seals, and...
Well, my freshly fixed prius did not last long...a month and a half later and nearly 2000 miles on the newly fixed engine and after being given a...
Thanks! I actually used oven cleaner funny enough, easy off.
Well, Pistons 2 and 3 are clean enough to eat off of now. [MEDIA] I'll work on 1 and 4 tomorrow. and will try to figure out how to change the...
Is there a video on doing this?
EDIT: I misread what you said. I was thinking the tops of the pistons you were referring to. Tops definitely don't look uniform, I would say 2 &...
Photos [MEDIA], [MEDIA], [MEDIA], [MEDIA], [MEDIA]
Head is finally off. Cylinder walls look fine to me, tops of the pistons don't look that great and neither do the valves. What's the best way to...
I'm still in the process, I got the wrong headbolt socket, so waiting on the correct one to arrive. Then I should be able to remove the head.
So I just cleaned my EGR and it's only been about 15-20k-ish miles since I last cleaned it (was the first time ever then) and it looked as bad as...
I change my oil every 5k with synthetic, but I notice that as I'm nearing 5k maybe about 4,000 miles or so through my 5k interval I start to get a...
Yes, the code came back on the next morning, can confirm the Head gasket is bad.
UPDATE: I cleared the code, swapped the coils and plugs around, restarted the car, it rough idled for a moment similar to a really cold start or...
Thanks Mendel, I believe the thermostat and water pump have never been changed yet. Looked this morning at my coolant though and it appears to...
