Separate names with a comma.
Some people put it in the oil too. DON'T! If added to the oil, it can knock sludge deposits loose which can then plug coolant ports and wreck...
I had an OBDLink MX plugged in at the time with Torque Pro running on the phone. I did notice it was having some trouble communicating with the car.
Negative on 12v flashing.
[ATTACH]
[IMG]
The following set of error codes all occurred today during a 180 mile drive with a 2007 Prius. At one point, the Park/Reverse/Neutral/Drive/B...
I have some modules that I'd previously removed as bad which I'm experimenting with to see if I can revive them by exercising them and charging...
I was expecting the twinned unit to have less resistance and greater capacity. I don't know if less resistance was achieved from the car's...
For this testing, the battery cover was in place. The batteries started at the ambient air temperature of about 96F. The air conditioner was on...
Initial testing was done with 2 good modules removed from the battery and replaced with 2 weak modules which had previously caused the red...
Top: Current 2nd generation Prius battery and voltage sensors Bottom: Proposed configuration
TechStream is showing 0.03 ohms resistance for the older blocks in the current battery. Twinning with similar modules would put that at 0.015...
My first idea was bolting the additional batteries directly above the originals, but that's less safe and more work. It might be okay for a few...
