Separate names with a comma.
No lights, I have the VCI to confirm, I haven't seen any codes related to the braking system. I do have the maintenance required light on but I...
Quick back story, bought the car a year ago, seller told me it was in an accident and the radiator was replaced. He let me know that the discharge...
The reason this was such a pain is because the *&@*&# that "fixed" my car before selling it to me put a drain cock, a rather large one at that...
well my issue is gone, cant definitively say what fixed it. I did replace the harness and ran new wire. I close the circuit at the ECM harness end...
Yeah I was expecting 1.5 v as well but the battery is used and its from Harbor Freight and likely cheap. I tested the voltage before connecting to...
Thanks epoch. The cracked connector was at the OCV side. In fact it was so damaged there was no clip (it is the same connector at the S20, T2 and...
As always thanks Patrick. II took similar but not quite exact measures to what you described. With the engine I remove the E4 plug from the ECM...
I am getting P0010 and I have replaced the connector and tested the wiring to the ECM harness. When the car is in ready mode I am getting really...
Dug in on this some more and determined it was my oil control valve sensor and not the camshaft position sensor. I wasn't getting voltage at the...
I destroyed my radiator drain plug and purge plug (not on purpose) and Im having a hard time replacing them. I am 99% sure the radiator is...
Thanks a bunch
Sorry P0010 not P0100. Any advice where to start looking for the oil leak?
