Separate names with a comma.
So I was able to find the live data. I got the voltages to 0.72 and 4.18. I really couldn't do any better than that.
I do have Techstream and a cable. I don't know how to measure the voltages with that, although I know how to run a health check.
It's been a month, but I had two codes that both could be either the skid control ECU or the brake stroke sensor. I did not even order an ECU. I...
Where do you measure those voltages? I know you gave some letters, and maybe those are names of connectors?I was able to use this thread to get my...
I have a 2008 with bluetooth that works, but the entire Prius is broken with a brake problem (I have posted about this before, and I cannot fix...
I am getting ready to take my 2008 to a different stealership. I switched the skid control ECUs between the two (2005 and 2008). They are...
So, in October I tried to initialize the linear solenoid valve on the 2008 (the 2005 is working fine so I did not mess with it). In order to set...
Thank you for the more information. I did not initialize the linear solenoid valve or calibrate on either vehicle. The 2005 had no codes or lights...
Gentlemen, thank you so much for your help. I'm wondering where I should focus my efforts. I will be doing more testing on the wiring harness....
Thank you. I already swapped both relays off another Prius with no codes at all, so they are not the problem. I took the ABS pump off that Prius...
I ran the health check. I did not see the detail codes, I am not sure why. I did click the little blue icon (snowflake?). The car drives well, but...
I have Techstream and mini-VCI cable. How do you get the detailed codes? There are the buttons on the left, and the utility one I used to bleed...
Thank you very much, Mr. Wong. I checked everything in steps 1 and 2. I did not get accurate resistance measurements as I am just using a Harbor...
I have had many problems since July 2019 (it is now October). I will overview work done as it may have a bearing on current problem. In July I...
