Separate names with a comma.
Would you happen to have the instructions or pics for the easiest way to remove the filler neck?
It has probably been 6 months since I did the test, but if memory serves the test voltages were within specs slightly below 5volts. The solenoids...
Yes. I also did a smoke test & even swapped it from a 2003 Prius so this has me stumped. There must be something I've overlooked or missing.
What does this part look like & where is it located? (I can't really seem to find anything for this in the service manual) What am I missing here?...
I I have the same or similar issue as yours with a 2003 Prius I picked up from a dealer a few months ago with 200k+ miles. a p3125 with sub...
Thanks Paul. I am in NY. I was just curious as to see what the easiest way of removing it as it seems to be held by a seal and I thought I'd make...
I've recently finished my Technology Management concentration and just started on Project Management. Should be finished by the end of the year if...
Hi Bob. My plan is to get to know the Prius in and out. I just picked up another Prius (2003) and did a preliminary test from the scan tool and it...
Thanks, but the cat is fine. I've narrowed it down to a leak in the tank, CCV or filler neck. Just haven't had time to take a closer look (school...
What is the easiest way to removing the fuel filler neck?
Went to a dealership in CT and bought another Prius. This time 2003 and did the evap test with the scan tool and the initial reading says the same...
Update: I performed an evap test from the scan tool with the engine running and it indicates that the initial vapor pressure reading is the same...
Bob. Thank you for the detailed explanation. I am learning quite a bit about the Prius since getting it. Perhaps you can take a look at another...
