Separate names with a comma.
Do you sell used gen2 engines with reasonable mileage?
That’s what I thought, it should just re-engage. And yes, the manual does make a point of this, but I have two intake cams sitting in my garage,...
How do I re-engage the lock pin on the timing gear on the intake camshaft? The gear is able to move through its normal range of motion, but to set...
Pictures with the valve cover off...also of the timing chain, just sitting there, and me pulling straight up.[ATTACH][ATTACH] [ATTACH][ATTACH]
Update: Stethoscope check was unclear, though the ticking seems to be coming from the passenger side of the engine. Valve cover is off; before I...
Hi mr guy mann, I haven’t checked with a stethoscope, when I stick my head under the hood it seems that it is coming from the valve cover area.
Hi Patrick, Throttle body and plate were cleaned less than 10k ago, but I’ll take another look to make sure everything still looks good....
Hmmmm...a valve cover gasket is like $10 from rockauto, I might as well try to look inside there first. If the 3 and 4 valves and lifters are...
I agree...unfortunately I don’t have an air compressor to do a leakdown test. I’ll have to check with a local garage. I’ve used the oil in the...
A few months ago the tops of the pistons were looking a little dark, I used the Mopar Combustion Chamber Cleaner, definitely made a difference....
Compression update: From the left/passenger side - Cylinder 1 - 140-150 psi Cylinder 2 - 140 psi Cylinder 3 - 125 psi Cylinder 4 - 125 psi All...
It’s been a great car, another reason we are not in a hurry to get rid of it. Sure, there’s been the normal maintenance, but I’ve never had a car...
Hi PriusCamper, I have always done the maintenance and have been pretty precise when filling the oil. The intake is clean, I check it regularly...
Hi ChapmanF, I don’t have any compression or leak down info handy. A compression loss should result in a noticeable efficiency drop also, yes?...
