Separate names with a comma.
[MEDIA]
Is this correct way? [MEDIA]
Valde3 posted the spec schematics on an identical thread here: Does engine have to be dropped in order to access head gasket? | PriusChat
That missing 1% is why I made the post
I have schematics with torque specs along with studying videos and making notes about tips and tricks to aid in diassembly/reassembly
I am now at the Crankshaft wheel, which direction does it turn to unbolt? Is it opposite of the way the fan spins or the same way the fan spins?...
It was the 2 bolts hidden underneath. Blocked from sight by air housing headlight, all sinced removed. Along with windshield and brake fluid...
A new cheap motor won't be an option for a few months. I have the time and access to tools though
ABS Codes are: C1259 - HV System Regenerative Malfunction C1378 - Capacitor Communication Malfucntion C1310 - 1. HV System Malfunction...
Had coolant in the throttle body too, change the coolant/water control valve. No longer collecting fluid in the throttle body. The valve was stuck...
I ended up stripping the bolt on the idler pulley a month ago. The belt had way too much give to it. The original belt was chewed up. The...
Thanks Valde, exactly what I was looking for! Those two bolts on the underside of the mount were hidden, had no idea. Wound up clearing out that...
Going to see how far the rabbit hole goes! All I need to know is how to unbolt that one of two non-bolt washer off the mount and then I'll soar...
How did you get the engine mount off next to the pulley? Must Be Fixed! It Is Necessary! | PriusChat
How do you remove engine mounts, specifically the close to the idler pulley? I've unbolted all bolts but one is giving me issues. Has me...
