Separate names with a comma.
I think a new radio with Bluetooth built in is your best bet. I'm not sure you can use the built in mic with an aftermarket radio though.
If you do the resistor mod, the audio screen will say "Audio Off" all the time. If you keep the stock radio powered, the power button and mode...
Definitely get the harness, the colors on the harness should then match up with your aftermarket stereo. iPad ? HD
Sorry disregard or delete
I saw that topic too and was bummed when the link didn't work. I would also be very interested in seeing the guide if anyone has a copy of it....
I had the axxess going without the resistor and the stock radio powered and A/C controls worked. I didn't wire the axxess in properly though, so I...
technically if you're keeping the stock radio powered with the BHA1761, you shouldn't need the resistor.
Are you using the Metra 70-8114 or did you splice the wires in?
Although the old radio is still powered so the MFD won't complain, the wires going to the speakers are connected solely to the new radio. So you...
I'm pretty sure the HU powers the speakers directly without an amp in the non jbl cars.
Thanks for the link, do these led squares work with the dome lights as well?
Nice job, where did you get these?
The resistor mod is pretty easy to do. Just be careful stripping the wires, they're very thin. Just coiling the ends of the resistor around both...
I have the axxess and it works, but there is a slight lag. It might be a bad unit, I've had a lot of problems with phantom button presses. It's...
Dave, I haven't had the chance to pick up or try out the gen III shifter yet, but I'll post back when I try it out!
