Separate names with a comma.
nice full set up !! where does the 24mm front sway bar come from ? is it a Toyota OEM part or aftermarket part ?
Happy life is being fast when you turn, not in a stright line ! OEM touring spring rates are 2.35kg front and 2.80kg rear (can you confirm ?) and...
many thanks for your spring rates. As I'm running with BC Racing coilover, and replaced 5Kg front and 4Kg rear (supplied as default springs by BC...
in order to replace OEM springs, I would go for a set of H&R. But If you let me tell my opinion, I would first replace front and rear sway bars...
Very interesting rear spring rate. 6.7kg/mm (380lbs/in) is very high rate for street use. If the car is running with this rear spring rate I'm...
Hello Agent, thanks for your photos. Nice to have someone to talk with... you have a different spring setup and this is even more exciting !! I've...
Hello Agent, nice to have someone to talk with about these BC coilovers !! First please let me know what measures your coil springs are. Mine 5/4...
I'm back with NF. With last update of my Excel spreadsheet the unsprung masses are not assumed as 9% of total car mass, but have been replaced...
Hi Agent, nice to hear you went for BC coilover too !! Did you ask for 6/5 Kg instead of default 5/4 Kg ? Did you receive 6/5 Kg as a replacement...
In order to refine my math method to calculate chassis NF (Natural Frequency) I'm moving to obtain precise unsprung masses values. Front and rear...
Soft setting is fine. Softest (0/30) damping setting (both front and rear) gives something located in Under Damped level area and that's what I...
Here are some measures made on BC Racing coilover kit for II gen Prius: FRONT - Shaft diameter: 20 mm - Spring: 5 kg/mm rate, internal diameter...
Hi Agent J, nice to hear from you.. well, I sat front lowering at -25 mm and rear at -20 mm from OEM static ride height. If you are replacing...
I’m back from few drive sessions and what can I say about BC Racing Coilovers ? 1. U N B E L I E V A B L E ! Unbelievable the way this car...
I'm back with new measures of rear axle Motion Ratio. As suggested by hlunde I moved to measure displacement values directly on the car in order...
