Separate names with a comma.
Took the car to work today. The red triangle came on. P3015 weak 5th module. I reset the codes and drove it til work. The triangle kept hitting...
[ATTACH] So I took a few screenshots of the Dr. Prius view after doing a reconditioning and taking it for a test drive. Run very nice and mpg was...
Hi all. Does anyone have a prolong charger and harness for prius gen 2 in the los Angeles or OC area that you are willing to rent out or sell to...
I literally couldn't do anything for the time being as as nothing sticks out on this side so it is wedged in the remaining portion and cant come out.
No lights or codes for the block 11. The charger i used was Tenergy T180. I got 2 of them off amazon for $85 each.
So i put in for the time being like so and drove for 40 mins with no codes popping up. So I leave it be like this until a code pops up or better...
I didnt think of this. I can technically put the same long nut in the module next to it to fix the alignment issue. But the rectangle piece that...
So my nickname is the one mistake wonder. It is always one thing i screw up. I was using 48 inch lb torque but not sure what happen here. Is this...
So I balanced all of them and did a quick load test for information sake. I marked the voltage drops at 1 min and 2 min. Keep in mind these are...
So i have cycled all 3 times and final chg dchg to 8.4V. Currently letting them rest and hoping they fall inside 7.7 to 8.15V range before i do a...
Every cycle i fully charged it. I only discharged to 7.2 per 6 cells after the 3rd cycle. This is my 1st time messing with this so im just...
Thank you for the quick response. I thought 40% to 60% fell between 7.2 and 7.6. I guess i was wrong. So... 1. End with a Charge. 2. Balance to...
I just finished the 3 charge/discharge cycles for each module. I have them all hooked up now in Parallel to balance them. All balanced at 7.23....
