Separate names with a comma.
For future reference. 90% of the time I can tell which bearing is faulty by (wheels off the ground) spinning the wheel and grabbing the...
I've also got some on the bottom of the front fender. A bunch of leaves got stuck in there and caught a bunch of dirt. Noticed them after I...
Can't really see anything in those pictures but yes. Not uncommon for grease to leak past the boot even if it's not torn. Rubber is old and worn....
I've replaced a couple batteries in the past year and a half or so. They were still gen1 cells
Doesn't seem so crazy to me that something bent. You're a big guy. You pressed as hard as you could. Somethings gotta give. The part that bent...
Before final assembly I installed all modules in the same direction and daisy chained all cells together in parallel and left them that way for a...
So just to update. I replaced the next weakest module (I had ordered a few and had an extra). As you can see from a previous post that the...
These are gen1 cells
I'm with you Bob. The first time around was just an experiment. I bought the car knowing it had a bad battery. Just for giggles I replaced the bad...
Yes. Here is what I have right now. Cell# final dischargemA / charge mA after 3 cycles at 5A charge, .7 discharge 1) 2434 / 4281 2) 2001 /...
I've already run through a few cells. You are right on. I had already run 4 cells through 3 cycles @ 5A/ .7A. final discharge #s #1 cell 2434mAh...
Well, I would definitely pick good/cheap. I've got another car to drive in the meantime. So I'm not in a particular rush. Though of course I...
Thanks Bob. That translates to 3500mAhr right? Why so low? Just to be safe since as you said they are unknown? What amperage would you recommend I...
Hi. Sorry to bring an old thread from the dead but I've recently started cycling/checking my battery. I'm using a Dynam DC6 charger. I have one...
We do them where I work. But almost never did until somewhat recently. I would recommend them here and there. Not all the time for a few reasons....
