Separate names with a comma.
Because there is no such thing. If you were to disconnect the 12 V supply while the car was READY, it would be totally fine until you turned the...
One tiny clarification, it is not a valet key, it is your fallback if you should be in a situation where the fob battery is flat, and so remote...
Head gaskets fail rarely on the Gen 2, and the number of people who have actually replaced the head gasket is even less. Anybody who is active in...
That is an incorrect assumption, on the Gen 2. The Primary/Secondary thing was on the Gen 1. On the Gen 2, you only need one fully functioning...
The number of miles driven is less important than time in service. Have you verified that the odometer is reading the true distance this car has...
My guess would be that one of the buttons is sticking in the 'on' position intermittently. I wouldn't waste any time getting a second fob, as RJ...
You need to be using 5W-X oil in any case, and there is no reason to depart from the factory spec of 5W-30 for your area. That oil is good to...
Sorry, Phil, you have largely wasted your time. That guy is conflating balancing and equalizing and using the terms interchangeably, certainly in...
These are signs that the 12 V power supply is being interrupted somewhere along the way from the battery in the back. Checking that the terminals...
Thanks for sharing your dive into these sensors. I, for one, certainly appreciate your efforts. (y) I hope it encourages other similarly...
I doubt that is true for the EU Gen 2; these AI apps LLMs are known to just make stuff up. Here, and in Australia, the fob casing is sealed, just...
So you followed these steps precisely? Start with the car off. Hold down both the A/C AUTO and FRESH/RECIRC buttons (on the steering wheel),...
Maybe it’s just me, but that one’s a little too cryptic. Do you mean a manual archive or a Haynes/Chilton-type source? In any case, being a bit...
I don't believe the LCD panel would be bright enough to be projected to the windshield. Additionally, to be a true HUD, the reflective surface...
The OEM fob case for the Gen 2 is glued together from the factory. In order to get to the board, and if you want to reuse the OEM case, you need...
I noticed my 2007 hatch switch rubber cover starting to get 'sticky'. I wasn't in a position to replace it at that time, so, on a whim, I decided...
So, you're chasing this down because of a message on the MDF, yes? The next step, then, is to read the codes your car has. You don't have a...
While I enjoy driving with the windows down at say 35 mph or under, I don't get the attraction of high-speed driving with the windows down. In...
Fuel pressure can be checked at the fuel rail (you need a 'special service tool' LOL, that is a fuel pressure gauge, t-tube fitting, and a short...
The wire you removed fixes the warning message you get on the MFD, which says: Caution The transmission P lock mechanism is abnormal. Park your...
