Separate names with a comma.
Use them until they fade then all that stuff will pull right out that silicone will just pull up . Those are halogen after market housings with...
Sounds like when the AC is on you're making cold air what's happening after that is issue as stated above the AC has to be maintained by the...
I stayed with the 5:30 until 600,000 no reason to change it . Generally works perfectly no need to lighten anything up especially
And this is a brand new head provided by Toyota or a remanufactured assembly also done by the Toyoda system?
I've also lived in places that are so far away from civilization that pretty much there's no choice but to reuse by the time you get the new tubes...
Never seen that in the manual thanks for the reference and I've reused spark to plug tubes in 2z 1 z and quite a few other Toyoda engines from...
That's the rear spoiler if you will it is plastic it is painted can be painted back to black not sooo much
Long as you're modifying your own car at your own shop house whatever you're generally good .
I've bled My generation twos just like this a million times works just fine everybody says the lights won't go off in the internal valves won't...
Usually you move your cams over if there's no flat spots and everything looks good usually they pretty much do and spark tubes same channel lok...
You don't have to have the wheels off to bleed the brakes it makes it easier to access the parts wheels off . You can be be on ramps up front and...
Sounds like a pretty quick fix actually that's all that took the hit great .
I mean this is an easy job compared to years ago no belt a plug and four bolts . All of 45 min to install .have gauges set pulling a vac . Oil...
The dye isn't going to hurt anything at all it's the bad oil that causes the problem so if you use dye with the correct oil and injected to gen2...
What kind of numbers are you getting on the low and high side gauges when the thing is charged up properly and running like it's supposed to...
It seems you may be pumping but you're not pumping enough to make the cycle happen properly you're EXTREMELY low on his side . So lo side cannot...
But you say it this 95 number or whatever we're talking about here you're making cold the fat silver line is cold that means the freon is getting...
I was kind of partial to the oh What a feeling campaign this was a bit before that
Yeah these plastic intakes are pretty nice they go on and off pretty easily minimal fuss . No buried fasteners and all of that stuff
Nope and you have a pretty good amount of silicone gaskets sticking up out of the groive area . Somlenty to. Make the seal.
