Separate names with a comma.
OK - will get back to later - got to go for now Roy
What would you see the charge and discharge currents I have 2 styles of chargers - one will do 4 modules at a time but is limited to 5 amp...
I will cut the top off another Gen 2 module and fill one with distilled water and the other with your mixture.I have 2 chargers that are identical...
I will try that later to-day. The Gen 2 cell(in the pictures) now has a voltage around 6.5 volts as it sits dry. I will get some drain cleaner and...
Here are some pictures and dimensions of the Gen 2 module with the top cut off. The thickness of the top is 11/64 inch (4.4 mm) the total depth...
Yes I think you are right. Maybe be better to pull a vacuum after all. Roy
Dont you think drilling 6 holes and letting them fill by gravity would be a lot faster and easier and could be done without removing the battery...
I will try but my skills in the computer area are poor and I may not suceed. Roy
Will try that Roy Putting a new roof on my garage so will be busy for a while - will check for messages to-night. Roy
25 to 35% would leave the level below the battery terminal so the possibility of leaking would be low. Roy John- I have a module cut off right...
Good idea about resin screws. The level in the modules must originally been above the level of the terminal screws,on the inside of the module the...
Yes Chap you are right, only one hole would be needed - when I pull a vacuum with my motorized pump on my car's AC I only attach to the connector...
I read the article - just like doing the cars air conditioning system - pull a vaccume wait to see if their is a leak - then fill with freon. I...
- Hi John - The techstream software (minivic) has a battery ECU calibration process that can be used when a new or reconditioned battery is...
Hi John- drilling 6 holes instead of 2 does not sound like a bad way to go if you wanted to do the work with the battery in the car - make your...
To help you imagine it ---- it is like 6 match boxes glued together with match diameter holes at the very to top of the boxes on each side - fluid...
The vent channel is really the space between the top of the cell and the battery below it is about 1/2 in deep by 1 and 1/4 in long by 1/2 in wide...
Roy from canada - John - I just cut off the top of 2 modules, one a Gen1 the other Gen2. Both had tested in the 2000 to 2500 range so I...
I now understand why you could not do it with the module in place, I have old modules that I may try your method on and see how they work under...
Could you rem By top of the module I mean the whole top cover of the module came off exposing the top of the plates.
