Separate names with a comma.
I have a charger purchased from Raj in CA It was charged in car. Test drive was 20 min after unplugged. Have no gauges other OBD 2
Engine always ran ok. Only after triangle and ex point lights Charged main again and now have a flashing white screen. Never seen that. Motor ran...
So before the test ride the battery was st 320 v. I drove 2 miles and visited a friend leaving it idleing for 20 minutes. Then 30 sec after...
The test drive was disappointing. The triangle & exclaim point came on and motor slowly died. Got a push home and charger showed 260v. It’s not...
I do now own a charger since I failed to borrow one. I did Change 12v battery then removed air filter and cleaned butterfly and throttle body. It...
Oops 3191 is correct code. Cleaned my glades
After a 3030 code , removed main battery from car. Repaired 3 bad connections and reinstalled. 3030 code is gone but have 3131 code. Motor runs...
2014. Both lights on and did try the paper clip trick between #4 and 13 pin. Scanner does not depict where issue is. Could use ideas. Thanks
Good info on the fuse but it’s ok. Removed main battery from car and all cells were 7.7 or higher. cleaned all connections and reinstalled....
Ended up buying one. Went for on 64v to 310v . Triangle still comes on and car jumps a little losing power. Took bat out and all cells are 7.70 v...
Is there someone to loan or rent a grid charger for Gen 1. I will buy one when I’m sure a charge on the main will start the motor. Car has a lot...
Thanks for help. How can we connect so I can try charging main. Does it need to be exposed to connect? How does it work?
Yes Chap explained that. Where is connection point to charge main battery? Thanks for responding
Replaced 12 v battery and no change. Cranks for 1 second. Evidently main battery needs a charge.
My battery charger. 12.6 Thanks
It turned out to be a clutch. Replaced the AC clutch and that was it. Old one was pitted and rusted. It was slipping kicking itself to off...
gen1 cranks for 1 second and nothing but a click in rear end. Good 12v. “Main” display came on but cleared self. No returning codes after...
Cranks 1/2 turn then just clicks at rear of car when key is turned to start. 12v battery is OK. Where so I start, Gen 1 with 424,000 miles
this Car has died
Gen 1 wont crank, 12v is ok. lost
