Separate names with a comma.
The parts that are OS dependent are separated by #defines. It should be easy to figure out once you take a look.
The included readme file is the current changelog. For the latest version I tested for a few months before releasing it.
Maybe the HV fan needs cleaning. If the fan is clogged and the battery is hot then it won't be able to help with acceleration.
Yes taking out some of the grill block is much easier. The temporary temperature rise during engine off shouldn't be a concern anyway - some of...
I have most of the upper and lower grills blocked. It helps to keep the engine warm in cold weather. When it's hot out then it's a bit risky. Here...
From what you described the device does not seem to work well at all with your Prius. I tested ccdisce's device before and it worked great. I...
Another thought: Use STNTerm, just two commands: ATZ 0105 What do you get?
OBDLink SX is a good, relatively low cost option: ScanTool.net LLC - OBDLink SX Scan Tool/OBD Interface - ScanTool.net I am still puzzled...
Great!
Well to answer my own stupid question: no need to disconnect the 12V - nothing blew up when I took the panel off. YMMV of course.
Baud rate of 38400 is not fast enough to run in the Normal Mode (run type). You can try the query only Mode. The log file shows "CAN error"...
Hi Roberto, Glad to know you are making progress. It was my fault: I hardcoded the lowest ECU address to distinguish passive from active frames...
Are you saying that with an older version of PriiDash software and same hardware at 500K baud rate, you were able to run in Normal Mode? From the...
Let's take a look at the two files included in the package: command.txt: // init and query commands for gen 2 Prius, max line length 1024, //...
Could you go to the command window (it opens automatically when you run priidash3mfd.exe) and see what messages are there?
There are many built-in parameters in PriiDash: from the very basic such as the car speed to the Prius specific such as the individual block...
I have been scanning daily on every trip with my own software running both OBDLink and OBDLink SX simultaneously without any issue. I also tested...
Get this one: A Prius ECT Spoofer MCU Controlled | PriusChat I have been using one for years and it works great.
The code is uploaded here: https://sourceforge.net/projects/priidash/files/2014-04%20MFD%20version/
Sorry I haven't packaged it for Linux for a while so it may need some additional work. Your best bet is to install NetBeans IDE and see if you...
