Separate names with a comma.
after much hassle re-deploying a new TS instance on another laptop, taking the HV pack out, putting it back in again after testing the...
HV pack back in, all of its bits and pieces have been checked, 213VDC at the output legs currently. Prius wont go into green light ready mode,...
if we have the means, what's the proper charge voltage per module to bring each one up individually? .
fair enough, I happened to see a post where a loose nut on a module terminal / bus bar caused similar codes as mine so I figured I'd check while I...
figured I'd give my HV battery a once over to rule out any loose nuts or connections. I know they tend to develop corrosion over time. not sure if...
Amazon has everything... don't mind the years being for newer generation. I bought this one and it fits fine: KUST Custom Fit Windshield Sun...
I give my Prius a healthy drink of oil every other day when refueling... I commute 80 miles per day most work days (40 mi each way): 8-12 mins...
I mis-read and mis-underestood how to test the relays and tested relay #1 in the opposite manner I was supposed to... turns out all 3 are good and...
main relay #1: not clicking with 12V applied to terminals 1 & 2 resistance across terminals 5 & 6 appears to be 119 ohms regardless of 12v input...
main resistor tested at 19.9 ohms, working on identifying and testing the main relay #1 next .
ah, too late. I've got it tore down to the HV pack, about to test resistor and go from there... the 200A fuse in the service plug is good too. I...
to clarify, I need to remove back seat + trunk trimmings as if I were going to swap the HV pack to get to all the main items I need to test, correct?
This morning as I merged onto the highway and got on the throttle my 2nd Gen Prius threw a fit along with a single quick beep + "PROBLEM" on the...
after cleaning cat: Upload and share screenshots and images - print screen online | Snipboard.io reinstalled everything and all is well. no...
commuted to work this morning with no catalytic or muffler and my attempt at an O2 sensor bypass. I left the 12V disconnected last night with a...
I am trying not to cut into or destroy my perfectly good (afaik) downstream o2 sensor / wire harness... Was considering unplugging and running a...
to avoid further troubles in the longer term, do you have any quick links handy for faking out the downstream o2 sensor ? I have wires, soldering...
yeah I think I might try soaking / pressure washing / chemically dissolving some of the buildup to see where that lands me before jumping straight...
got the cat off, she's clogged: 1.) Upload and share screenshots and images - print screen online | Snipboard.io 2.) Upload and share...
Strike 1 -- again, doesn't bother me, I am used to it and do not care one bit about not having a dash Strike 2 -- zero battery codes or issues...
