Separate names with a comma.
Until I got my Prius, all of my previous cars had incandescent headlights. That golden glow just gives my eyes "the warm fuzzies" at night. High...
From the description in the manual, the leveling ecu looks at the height sensor signal. If that signal is steady (and headlights are on and...
If someone is really good with Tig or Mig, then weld a small (thick-ish) washer to the pin stub. Build up the metal blob some and weld it to a bit...
What does the fuel gauge show? In theory, P3193 should only set if: the engine doesn't run (or produces very low torque) AND the fuel gauge reads...
Well, when the dash (Combination Meter) does not work, that usually means that none of the warning lights can function. So you won't know if some...
Actually, that's something about the OBDlink site that annoys me. Go to the home page and you see this. 'Service Program keys ABS bleed, E-brake...
I have a screen capture from Autel freezeframe in post #11 above. P0A0D, with INF 350.
Please show me data about freezeframe and INF codes on non ECM systems. If you read all of my posts about OBDLink, I always state that it has ODB2...
It's the "ThinkDiag OBD2" (not the ThinkDiag+, not thinkDiag2, not the "mini" etc). I let my subscription lapse after 12 months. Everything stops...
Umm, the Autel does do some of those bidirectional functions. The ThinkDiag (by ThinkCar) was able to do anything that I tried with it. Brake...
You keep bringing up information for a Gen3 Prius that's irrelevant in this Gen2 forum. That alone speaks volumes. Posted via the PriusChat...
Sigh. In school, we had reading AND comprehension. You can read, but you do not comprehend. I stated that OBDLink could only retrieve...
I have the OBD Link MX+ device and app. When I used it, I could read codes on "all" systems of my 2006 Gen2, but I could not do a "system scan"....
For a non-SKS Gen2, you should be able to erase all key fob data from the used door control receiver (they call it the "rewrite" function), then...
I really doubt such a thing exists. All that data is buried in the code that's used to program the hybrid control ecu. That's the boss of the...
I pressure test the system - 15psi is plenty. Often leave it pressurized overnight. Pull the plugs and look in the cylinders (lots of videoscopes...
FYI, if you replace the hybrid control ecu, you need an "OE level" scantool to perform a handshake procedure between the HC ecu and the...
Where did you get the fob? I don't know if that's the correct # for your car, but I wonder if it has a good RFID chip or not. Or if the dash slot...
A common leak source is cracks in the seam sealer around the top corners of the tailgate opening. As mentioned use the search function. At the...
Keep an eye on fluid levels and see how things progress. First sign of a head gasket coolant leak is (minor) engine misfire on cold start. Then...
