Separate names with a comma.
I think this has all the information you need: Prius 2008 Won't Start with Key in Slot. | PriusChat
Yes. That's clearly bad. Those are all sense wires going into different battery blocks so that ecu will know their voltage and that one is clearly...
Yes it's not easy to remove by breaking. But depending on what is attached to and type of bushing you can use different methods like burning it,...
You can't use wheel bearing puller to remove these types (and many other types) of bushings as the one side of bushing is larger than the lip on...
Some of the codes seem a bit weird to all happen at the same time. Almost seems like 12V battery was not disconnected. Best would be to log them...
Just needs a new clock spring. That's the cable that connects all wires to steering wheel. Many people are complaining about cheap Chinese...
But there's so much fun in these, 12 cylinder Priuses, rebuild 12V batteries, and I really liked the self heating discharger... :D As a fault...
Last time we came to a conclusion that your scan tool was bad and it just shows random codes. If you just use the same scan tool it probably shows...
That's almost surely caused by a dirty throttle body. If you decide to clean it at some point reset it at he same time and you don't have to wait...
Did you use Mini-VCI? What website did you get the code? All worked first time?
But still with the same scan tool your scan results are just as unreliable.
Or is this the same one where you had the somehow refurbished 12v battery and used water to clean the throttle body? I think Priuslover09 had...
Is the beg really that bad? Generally (on other cars) those begs mounted on body are still good for multiple muffler replacements. I think you...
It's not really safe to drive with malfunctioning brake actuator. You could even go down to manual (non assisted) front brakes only and that would...
Might just be a bad actuator. Or something could have happened during the actuator replacement. Was it used actuator? Voltages seem to be between...
Can you post the frame data for C1256 also?
Just look at the freeze frame data. Your 12V system voltages are around 9v! That's probably why the learning process fails. Just jump starting...
My guess would be a dirty throttle body. Disconnecting the 12v battery will loose the idle calibration. It will then move around to find it and is...
Your 12v battery voltage is way too low! You need keep it up during this. Power supply, cables from another car or battery, maybe charging or new...
If you don't have a check engine light and fault code (P0420) catalytic converter is working good. Prius is monitoring the catalytic converter all...
