Separate names with a comma.
A block heater is on my list before next winter. I had a Ford Aspire and worked on Hypermiling it and could get in the low 40's with it in the...
The previous owner put on 185/65 14 Cooper CS4 touring tire. I've had them at 40psi. The temps are going up, I'm up to 42 on this tank after a...
Preventative reconditioning? What would I need to do that? Thanks! Gerry
I set up the scan gauge to show the high and low block voltage. Watched it driving to work. Biggest difference I saw was .5V. Both high and low...
Looks like I can program in the highest and lowest voltage block readings. Will check that out! Thanks! Gerry
My manual shows a 4 pin connector for the key interlock solenoid. Gerry
I have a early 2001 (build date 06/00). It has 100K on it. I bought it broken, had to replace the HV ECU and a front wheel bearing. No codes or...
I've noticed with my 2001 if I don't put it in park when I turn the key off (it will only turn to acc) all the display lights go off but the...
Yes, you'll need to take the wheel assembly off. Also you'll need access to a hydraulic press to press the old bearing out and the new one in....
Replaced the right front wheel bearing today, and it was the source of the noise. I feel very lucky! I really like the car now that it's nice...
Okay, didn't fix it. Has me scratching my head though. If you weave the car left and right going down the road the pitch of the sound changes....
Thanks, but I did figure this one out! Searching the internet I found if you replace the HV ECU you need to put a charger on the 12V battery and...
Thanks again for the replies! I removed the left front wheel assemble today. I feel lucky I didn't break anything. Man those nuts and bolts were...
Thanks Andy! I drove it to work Friday, city streets to and interstate back. 25 mile round trip. Noise didn't get any louder but on the way home...
Bob did say it was on its 3rd rack. He said he didn't get the PS light till he ran it with the wheels off the ground. Hoping 3rd time is charm!...
Okay, got lucky and solved this one on my own. Read online that after replacing the HV ECU you need to hook up a charger to the 12V battery, turn...
Question, I'm trying to see if there are any codes on the Engine ECU. Could I use the below CMND string and replace the 16 (address) with 10?...
Hello all, After a 800 mile trip with a trailer to pick it up last week I've started looking into the problem Bob discribed in his "Mechanical or...
