Separate names with a comma.
I frankly have no idea why, just wanted to try one that had many positive reviews and still do not know what are the high end brands and where to...
I just discovered that my OCC kit fittings have exact same M16 thread size as Prius OEM PCV. So I decided to do this experiment... Installed...
CC2 (Cross Climate 2) Michelin tire appears to have a little more aggressive thread with bigger gaps, is it also all season(A/S) or some sort of...
After about 800km of driving in colder temps with new OCC I found that my Intake Manifold(IM) under Throttle Body(TB) got a small amount of same...
I personally like Michelin Defender T+H A/S tires. They are rated low resistance too. They provided good fuel economy, good tracking and low(er)...
You obviously have much more knowledge and experience on the subject than I do. There is probably not much risk of cracking the plastic hinge in a...
I can tell that this manual is wrong, at least for my 2012 model. To change oil the whole underpanel can stay in place or I missed something here....
That's pretty close to what I am thinking of doing too, thanks for sharing.
Can you reach and drain your OCC from the service opening or you need to take off the whole underpanel to drain like Mendel described?
Thanks very much :). I plugged in today before driving and noticed straight away that the cabin heater started blowing warm air almost...
Thanks for useful information Mendel, really appreciate that. I have now plugged in the heater and wondering how much time is optimal to plug in...
You are correct, it is cooling only if there is no heat pump technology yet.
I can take the cowl off in 5 min. Here is a YT video on that.
Mendel, You can be right about when heat pump tech was introduced in Prius. I only know that AC system in my generation Prius is fully electric,...
100% agree with how it would be a royal pain reaching from underneath. I wondered how difficult it would be after I lifted the car and removed the...
This is a relatively small cartridge heater and at its 400W capacity it would only increase the engine block temperature by 25C or so to have a...
I can drill and tap the hole in the can I have now. My OCC bottom is about 5-6mm think so it should be easy to modify. I need to find a suitable...
My car is also living in a winter salty and rusty belt of South Ontario. I cleaned the heater placement hole with a short pipe brush before...
I like the idea of low location as it should work better with shorter hoses and better draining into OCC. I feel that I will want to check and...
Thanks for the useful information. I got some questions about your modifications: 1. How fine (microns) is the stainless steel mesh and where did...
