Separate names with a comma.
Thanks guys for sharing your experience and ideas. I will need to monitor how good my can setup works in a few months. Today 's temperature was...
After taking front left wheel off, the dropped 12mm socket was located hiding in a small nook under the steering assembly support. All parts...
OCC is now installed. Used 7' long 3/8 fuel line and two barb splicers from PA near me. I have read the OCC big thread (in part) and being...
Compressed air blown everywhere I could reach did not help to reveal the dropped socket. Decided to take the driver side front wheel tomorrow to...
Today I have installed the heater with Permatex Silicone Dielectric grease that I already had on hand. I installed it from the above. Will see if...
Correct, I see oil level stays approximately the same between the oil changes. That is probably why the whole EGR system was not very much...
When I was cleaning EGR recently, my Prius air intake seem to have had one horizontal passage from EGR pipe which then branched into each cylinder...
Thanks Mendel, I'll install OCC then. I wonder about EGR revamp you have mentioned above... My Prius has 266k km, I bought it with ~150k and I...
I've read in OCC thread here that 2012 Prius implemented a newer design air intake manifold. When I was cleaning EGR and intake recently I could...
Good to know, thanks! As a final touch I wiped all plastic and metals with silicone spray in hope for more slippery surface so EGR carbon deposits...
There maybe something else going on with the engine that caused HG failure. I have read that one of main causes of HG failure is engine...
This is just my opinion based on what I learned about this issue, I do not have personal experience changing Prius engine head gasket, but did...
Yes, I was looking at this same grease too, since it is a heat sink type and some customer reviews mentioned that they used it for their engine...
This G624 is a multi purpose dielectric grease, similar purpose and spec to the one I already have - Amazon.com: Permatex Dielectric Grease...
Looks like it is no longer available, unfortunately. I hope that KATS heater will fit once I get it in the mail.
.
Thanks!
I called my local Toyota dealer first and was told that OEM is no longer available, so yes I could only get KATS aftermarket brand.
Yes, it was your experience I was referring to, thanks for sharing! I understand that a very small amount is needed as it is a tight fit,...
Are you positive the rattle comes from the engine and not from other source like for example corroded and loose heat shield(s) around exhaust...
