Separate names with a comma.
I don't believe there is any known mechanism for the dealer to suppress codes. Might want to duplicate the same conditions as much as possible...
2013 Prius Two with 153k miles, ATF drain and fill for the 1st time using Genuine Toyota WS using the NutzAboutBolts tutorial (not the original...
@UngaBunga86 thank you for that summary! I wonder though, where and what brackets you used to mount it?
SUMMARY: In finishing this replacement, I believe there are an additional 3 gaskets/seals not mentioned. Total 4+2+1+1+1=1=10: 4 spark plug...
Thank you anonymous and mikey ... clamped the wiper cable down and drove her about 30 miles without the cowl. Started up as normal ... just a...
2013 Prius Two with 153k miles. Completed the list of maintenance below. Are there any precautions I should take for the 1st startup? (already...
Many thanks to you again Master Po as well as Georgina. What worked for me in the end was trial and error: ordered a different brand of valve...
Thank you Georgina! Sorry to not understand, but I do not have the proper foundations to know how to proceed. Could someone please help...
Reading the manual more carefully: REMOVE ORIGINAL spark plug tube seals and SAVE them CUT OFF FLAP OF ORIGINAL ONES and install the NEW ONES by...
Thanks again Master Mendel-Po, Georgina and TMR - sincerely appreciate the advice! Georgina: Would you guess a "typical machine shop" has POM...
Update: After scouring the internet for hours, 2 additional suggestions in the spirit of MacGyver: (a) DIY press with a bolt, washers and PVC pipe...
If the valve cover is oriented in its normal operating position, they are inserted from the bottom to the top with the bulge side facing down....
Would anyone have access to the Official Toyota Repair Manual on how to change the spark plug tube seals? Having a devil of a time ... have...
Again, thank you all for your advice and encouragement! For those interested in the blow-by-blow: - taking the spark plug tube seals out was...
Oh, sorry, I thought you meant bend the tabs back for getting them out. Should have thought forward and deduced one might have to do that for...
Got them out easily with @NutzAboutBolt tip of using a long handled pry bar. Anybody know any tricks about putting the new spark plug tube seals...
The Critic and NutzAboutBolts - Thank You both for the advice. Holy crap @NutzAboutBolts you should patent that method because, although...
I saw a youtube video where a rubber mallet and screwdriver were used to basically punch the seal out in one piece. No such luck for me, but maybe...
Copy that also Sir Mendel: Don't use OxiClean on EGR cooler ... but OK to use OxiClean on the intake manifold @NutzAboutBolts instead of NAB Take...
Thank you again Sir Mendel. Yes, as far as I can determine, the original stud (90126-08052) has been superseded by 90126-A0019. AND I can...
