Separate names with a comma.
See post #6 in this thread for more details. Yakima rack towers on 2012 v? | PriusChat .
Difficult to find. Good luck in your quest. I ended up using ratcheting straps to secure my Yakima SST racks. Now I can mount my crossbars to any...
Yeah, it appears to be a depth micrometer. https://www.mscdirect.com/product/details/15895923 .
I always remove the button cell battery before putting it away. Only put it in when using it, the Duracell battery has lasted a few years now....
Got it way back, online Toyota parts from a dealership had them on sale. Was a good price, even with shipping to the 50th state. Posted via the...
Doh , I meant calipers... good catch. [emoji16] Here's my Mitutoyo calipers reading an inside measurement in millimeters. [ATTACH] Posted via the...
If you have the wheels in hand, throw one rim on the rear and see if you have clearance issues. You may have to get some lugnuts though. Look...
Here's our 2011 Prius with old school Subaru Imprezza WRX wheels (16 inch). The back of the wheel spokes clear the rear brake caliper carriers by...
Yes, the 54.1mm to 56.1mm adapters are what you need. The clearance issue isn't in the diameter of the wheel, but in the offset of the back of...
Here's what I was referring to about the lugnut seating against the BRZ wheels. I think the seat on the wheels look like the radiused seat on the...
IIRC, you'll need thin spacers (3mm) to clear the rear brake caliper carriers. The fronts will be OK. https://a.co/d/29hJHLt You should also get...
Make sure you disconnect the negative cable at the battery before you go wrenching on that stud. .
Looks like the horns could be mounted on the other/backside of the brackets? Then no clearance issue with the bumper? Posted via the PriusChat...
Nice job; however, rotate the horns so that the open ends are pointing downward to let any water that gets in there (road spray) drain out....
Roadrunner goes Meep Meep, not toot toot. [emoji6] .
Perhaps you didn't get the correct size "M5" nut out of the parts bin? People are always throwing random SAE into metric bins, etc. Posted via...
Sounds like the M5 nut was the right size, but the wrong thread pitch. Sometimes nuts come in course and fine thread pitches, for this...
