Separate names with a comma.
I have my unit running on W7 32 with 2.6.0.0 driver. The latest FTDI driver is 2.12.28 I can't get mine to run on W10 x64 with either driver. I...
the key would be the protocol the adapter supported vs what your car's protocol uses. Bluetooth vs USB has no bearing on CAN, K-Line, ISO, etc....
it may be a Techstream feature. I have experienced the same thing a couple times on 14.30.023 and W7 32 bit. I have also read others having the...
Mike = I have been struggling a LOT longer than you. Good thing I am retired. Firmware Update Tool does not work on an x64 system. Some x64...
thanks twm I am new to this TS but I went looking for the subcode and could not find it. There is no snowflake there. There is one on the P1121...
I am chasing a multiple DTC issue and would like to remove the integration relay for testing. HOW??? thanks
I FINALLY got my Techstream adapter working and found these codes on my wife's 2007 Prius. The 1st one I saw on my ELM327 adapter and Torque ==...
anyone still watching this thread? I have similar issue, and I have seen an older thread of my exact issue, but know one is watching that one. I...
looks like I would recommend buying this part at a local parts place since apparently, it isn't uncommon for it to need replacing again.... and...
thanks dolj I bought more AF this AM. I put about 8 oz in the OF tank, maybe 2oz in the radiator. I ran in maint for 15 min b4 the fan came on...
Everything is full. The engine OF tank is 3/4 full. It feels like the thermo is stuck. It worked fine when I tested it. It started happening on...
I replaced the "inverter" cooler control -- so aptly misnamed -- because of a P1121 code. All the AF I took out is back in except for a few...
Yeah, now he tells me...........AFTER I finally figured it out. There are so many posts about this subject and all of them perpetuate the myth...
Are the engine and inverter cooling connected or are they totally independent?
I ran the pump via the relay jumper for 30 sec periods about 10 times. I need to look at the thermos and see if the sensor is still connected. I...
dave - thanks Yes, I did also try driving the car around the block with the heater on. No heat. No gurgle, but then I may not hear it, old ears. I...
I just replaced the inverter Control Valve 16670-21010. I had a P1121. Before I disconnected it I drained the thermos bottle of about 1.5 gal of...
I found an error in PRIUS PIDs - The entry for {PRIUS}InternalResistance)08 is actually IR6 and there is no IR8 entry. At least I didn't find one...
BTW - something changed in Torque. To get to export/import on mine, I hit Realtime Information then the setting gear at the bottom of any screen....
