Separate names with a comma.
Hi again austin relay t-lp supplies power to both tail fuse and 7.5amp pannel lights fuse (shifter light, main power switch light, and something...
Ok Austin. I've been reviewing schematics. power to the 10 amp tail fuse is provided by relay t-lp (tail-lightpower). The only upstream fuse from...
Hi Austin. I think you still have a short circuit where you installed the led strip.. Only one fuse can blow (go open) at a time. If you found a...
Toyota ws transaxle fluid is one of the thinest oils and is the only fluid that should be used in a prius.. Your transaxle has lost most of its...
I think your are right Dolj..
perhaps your prius plugin hybrid is different 12 volt capacity or 12 volt battery is boosted occasionaly from larger capacity hv battery/charge...
Soren that sound you recorded is the brake accumulator pump. It should not be running every 10 seconds like that.. It would normally run first...
Hi again Gary. I have I little more information that my be of use to you. A prius that sits without use of 24 or so days will have a 90%...
Hi Gary. You say the car will not power up at all.. "nothing" Even with the hv battery saftey disconnect pulled. The prius should still power up...
Perhaps the new prius's are being shipped with the higher quality oil (sl rated) that is outlawed in the USA. The older rating sl had about 1500...
I removed 12 oz which is not .75 quart.! .75 quart would be 24 oz ! When draining prius transaxle not all the fluid drains out. My calculations...
I just changed our gen III transaxle fluid drained 3 quarts and 7 oz (3.23 quart). refilled with 3.75 quart. I used new aluminum gaskets...
Jd wouldn't CFO be more usefull than batt fan mode. When using scanguage. And doesn't CFO change with vehicle speed? I believe I have found the...
Hi jadziasman . Your refeering to fan mode when you mention seeing changes from 0,1,2,3. It is important to understand that fan mode and fan speed...
I agree with your fan mode changes/temperatures and battery temperature does in fact control which mode the fan is in. You will soon learn that...
Ok I'ts very easy to hear the blower speed increase (with good hearing). Especally in the genIII . The torque app takes bytes a and g (bytes 1 and...
I,m unable to find CFO OR VMF on the genIII Scanguage master list. Can you paste those txd's rxf's rxd's and mth. That will allow me to determine...
The blower from gen II is marker as 12 volts. A government testing lab reported genI blower current as 5.75 amps at 12 volts. My genII blower...
Can you comment about cfo percentage being much higher than the voltage percentage (4/12 = 33%). Is the cfo % from the scaguage? Is it one...
