Separate names with a comma.
Camper, Thanks for the input - those meters are not Cheap ! - They are Free : ) I know the threads are mounted in plastic and are not...
see the video in the link below - I was at 115 volts before I pulled the battery. Due to the long thread - it is the HV leak code P0AA6 that I am...
I've left one meter on for several hours and now am down to .8 volts - maybe I'll let it sit overnight and see where it ends up.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Well I'll certainly avoid unhooking the 12 volt multiple times to reset the code - but for now I let the...
I could not get any of the cells to make bubbles but if i test each cell separately with a voltmeter - using the mounting threads at the bottom of...
StrawBrad........you mentioned the leaks are deep down the rectangular hole next to the mounting bolt hole........ I'm going to try something a...
What might be a good charging voltage to use for charging individual modules so that I can leak test with soapy water from spray bottle? I have a...
StrawBrad - I'll test the cells when I get back to Tampa - figured that the current path may have been broken in the process so I'll retest at...
One thing I'll have to keep in mind is when I did the test via the method in the video my report was - "I did the test as StrawBrad outlined via...
All 28 units were made on Feb 23, 2006. I had the feeling that no one had been into the battery before as every nut and bolt was right were is was...
Ok, I found the date code info - thanks for bringing that up.
Is the date code included in the numbers I'm showing in previous photo? I've been wondering if there is a date code on the cells - I'd like to...
Hmmm....I'll have to check the numbers again as this shot of the 5 cells are from the 5 that were giving me a reading to ground. [ATTACH]
deleted double post
None of them were leaking near full voltage and .28 volts was the highest voltage shown on my meter set to 20v DC. (I checked with a 2nd meter to...
Yes, electrolyte escaping and causing a voltage path from individual cells. I was finding a path on 5 modules with the HF meter....I suppose its...
BTW, the stain on #6 does not show on the other side but I think you are correct and when I pull the cells it will show.
Yep, if I press down on the cell I get an intermittent reading and 3 others down on that end of the battery as well. (Now whoever heard of an...
Any thoughts on the dirty bus bar.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] With the bus bar removed and re-testing for leaks the only leak I can find is the one cell farthest from the...
