Separate names with a comma.
You changed for the Phillips expensive halogen bulbs at the parts store generally the part store doesn't sell the Philips LEDs that retrofit to...
Well it's on the roof aimed up towards the sun and rubber shrinks really bad from son and ozone and general weather and the car is 12 years old...
Just have them pay close attention to your inner and outer tie rod and rack ends If there's any slop etc
He just plop the throttle body right on there tighten it up push the cooling hoses up start the car up Wait a few minutes The little bit of...
That's really wild I have power stop coated x drilled dimpled slotted rotors and caliper set on the persona . All bolted right up nada Amazon...
Sounds like you may have the battery isolation fault. You're locked out of the system The relays won't click open they immediately close back up...
In California you either have the money or you're going to make the time to do it yourself even in your HOA neighborhood you'll change out the...
Yeah they all used to come from the manufacturer or remanufacture with all the holes plugged and that kind of thing the last few years that's all...
It's hysterical to the fakes or are great If you look at them carefully look at lettering stamping in the metal and stuff like that it is just...
Hong Kong phooey.
Yeah I never used a torque wrench or an extension arm to add torque or any of that to any of these and I've done millions of brake jobs with these...
The car should never start without the key fob You mean without the key fob insert it into the slot next to the steering wheel? Does your remote...
Right anything in that circuit can be to blame relay temperature sensor the main temperature sensor the pump funny thing is though you always hear...
Nope when I swapped out my 2ZZ engine which is what you're dealing with in your car to a Japanese model engine here in America like call it a JDM...
And use the original gold bolt and washers notice the cheap silver bolt supplied . Use the Toyoda original bolt n washers. Clear land for wSher...
You are using copper washers or copper colored washers in between the banjo I hope I don't even use a torque wrench for that I can't even imagine...
Taking the dash apart isn't a huge problem some plastic spluges Philips screwdriver things like that it goes pretty smoothly You can see some...
Well if you look at your second scan done you see in the red is the toe on the right side of the car in the front It's in the red It's zero and it...
Will your car ready Do you know what that means? If yes the minute you ready the car step on the gas did the engine just start No not the electric...