Separate names with a comma.
Good to hear you got the reverse wire working. No, my dealer didn't mess up the cover. I was surprise how difficult it was to put it back...
Ok, PAC just updated their documents to include the 2010 Prius. The 560ohm resistor still applies. So, to get 560ohm, I need to connect a 410ohm...
The surround will have nothing to attach to. If you can find a way to make it stay, it will probably rattle when you drive the car. You have no...
Here's more info: I suspect this is the problem: There is a 150ohm resistor embedded inside the harness that came with the PAC TATO. I connected...
Ok, I put this topic on its own thread. I hope I can compare my set up with someone who got it working....
Installed the Pioneer AVIC Z110BT using the PAC SWI-PS steering wheel control interface and PAC TATO JBL amplifier interface. I used the latest...
Thanks. I set the equalizer to "powerful" and it's pretty good for me. I'd prefer the flatter response of the Z110BT over the overly high treble...
Good to hear your install went smoothly. I tried to use the factory brackets because they are metal and provides a better ground (metal is...
That proves that the problem is from the SWI-PS. I wonder if other users have the same issue. There is a 150ohm resistor embedded inside the...
kamick81, did you have any problems programming the SWI-PS? I have version 1.6.8 which supports voice commands. Programming went smoothly, but...
Well, everything is posted now. I didn't change the speakers. My goal was to modify the car as little as possible. As for disassembling the...
So everything worked (except for one issue so far), speed wire and all. I would like to thank the users who came before me: rrolff, kamick81,...
I originally wanted to reuse the OEM microphone (located between the driver/passenger lights, right behind the rear view mirror). However from...
The first challenge was to find the reverse and speed wires (which the NAV uses for dead reckoning when in tunnels, driving under an overpass,...
Aftermarket NAV install - Canadian Premium Package (and applies to Prius III/IV/V w/o NAV) Finally installed an aftermarket NAV on my Prius....
Deleted post
Followed the instructions at AVIC411's forum and got the mute wire out. You need to use a very small screwdriver to lift up the plastic cover on...
Did you connect the reverse wire as per the European instructions? Did it work for you?
Next time you drive on the freeway, get a passenger to turn ASL on and off and compare the difference in volume. The difference is very slight.
Not sure about traffic as I don't have the original nav. Good to hear it's still working for you. I know some Garmins (the handheld ones) have...
