Separate names with a comma.
UPDATE: changed out the whole fuse box/junction box inside the driver area now the blower motor works. For Future who had this problem What I did...
it would take a arm and a leg to find out what is wrong, if i take it to a shop and i used to work at a shop too. but anyways a used junction box...
so the used ac amplifier came and i tried it still dont work. do you think my junction box is toasted? i am not getting voltage on relay pin #2...
so my coworker told me I should have 2 12v on the relay but I told him theres only 1 slot that have 12v and he say one of the slot on the relay is...
yep got it removed yesterday the air duct is the hardest part
just ordered a used ac amplifier and will update this if theres any result
i want to know what you have to remove to get to the a/c amplifier?
oky heres the weird part. i took out the HTR relay cap which expose the wires and when I touched the 12v side with my voltmeter the blower motor...
so i installed the used fusible link today now im getting 12v in the HTR relay. the black connector to to the blower motor controller is still 0v....
found out that the fusible link is blown, I have to buy a used fusible link and change it and test again. Will update this when I change out the...
mybe i screwed something up after i tested the HTR relay its not giving out 12v to the relay no more
the panel and taillight fuse is only getting mv and the engine bay DIM fuse is not getting any voltage too. do you think i poped the fuseable...
looking at a wiring diagram the only relay that connect Panel and Tail Fuse is T-LP Relay but it dont show wheres the T-LP Relay located
I was checking on some relay, I think I pulled out the HTR relay inside the driver area and the PHTR in the engine bay area I think thats what it...
hi so i was doing something on my prius and all of a sudden my dashlight dont work. my reverse dont work, turn signal dont work but my harzard...
so heres what i tested #1 relay is good and theres voltage going to the relay #2 the fan is good i put 12v to it and it spin so i think either...
so i pulled the HTR relay out and I check if theres voltage going to the relay and theres voltage so I can now confirm that theres voltage going...
nvm i think i know where that fuse box located, I think its inside the driver side above the first fuse box. I just used techstream to try to...
no everything is brand new I brought it from amazon
this fuse box [IMG]
