Separate names with a comma.
After running with the new HV and AUX battery for over a week now, the car is running very well and my MPG has settled around 10.5 l/100km (22.4...
Winter I'm getting around 21-22 MPG (11-11.5 l/100km) but summer it's closer to 26-29 MPG (8-9 l/100km).......we have lots of snow and hills so...
Think I found it....... 2012+ 3rd gen Prius grille blocking strategy | Balancing Act Doesn't look like anyone has done a Highlander so looks...
Any links or pics of that? Sounds like it might be promising.
Well I spent some time the other day and I think I figured out what's going on while I waited for my son's hockey practice to be done. First of...
I used a pair of Hitec x4 chargers at 2A charge rate and it worked fine for me but having said that I would probably do it differently now knowing...
First let me start of that yes, this is on a Highlander Hybrid but as the long battery rebuilding thread showed early on these vehicles are very...
I mentioned that back when I did mine as well when trying to find the best method for rebuilding to maximize service time. Gen II Prius...
That's a temp sensor code, not a battery voltage issue.......might be an easy fix if you go back in and have a look.
Gret to see you back and you certainly inspired alot of us to give it a go with your thread. Also pretty neat to use the fan's pitch as a quick...
With that many Prius in the family you might consider getting a grid charger setup from Hybrid Automotive then go ahead and install the harness in...
I would have added a saturated KOH solution not just straight distilled water because you may have diluted the electrolyte and that was why the...
To the best of my knowledge the hybrid ECU does look at a rolling nominal block (pair) voltage and then compares it to each actual pair voltage....
Cmon man, why not just say don't DIY this at home unless you have one of my $10k test setups. If anyone is interested the way I rebuilt mine all...
You can also just use an air gun like this, set your regulator pressure and hold it over the hole to test the valve. [IMG] Totally agree with...
Used JDM engines are definitely the best way to go when swapping foreign motors because they are usually well taken care of with very low miles....
Sorry I saw this late but look like you figured out you need to start the cycling in manual mode under the NiMH settings. Make sure it's in...
Those look to be cadmium coated and I'm a bit surprised household vinegar did that but certainly possible if left long enough......obviously not a...
Also if you guys are sealing holes with machine screws you want the smallest holes possible to seal well (ideally you have 1.5 x diameter of...
